|
We offer a complete line of patented ink cartridges for all printing requirements. Our inks are approved for direct food contact, indirect food contact, medical and pharmaceutical applications, and offer excellent adhesion for many different applications.
If you are interested in a specialty ink that you do not see See the table below to find an ink that will meet your packages requirements.
|
BELL-MARK STOCK INK CHARACTERISTICS AND APPLICATIONS
|
INK# |
DRYING TIME |
INK USE |
| 855 |
3 5 sec. |
For use on all non-absorbent surfaces FDA approved for food packages. Excellent adhesion to packaging films. Our standard cartridge ink. |
| FAST DRY |
1 3 sec. |
Solvent base for use on all non-absorbent surfaces. Excellent for film and cellophane. Widely used for VPMs in food facilities. Very fast drying. |
| 850 |
5 - 7 sec. |
Dye and solvent based ink. Good on non porous Surfaces. |
| 370 |
30 sec. |
Dye and solvent base used on film, Tyvek or all non porous surfaces. |
| 245 |
5 - 10 sec. |
Solvent and dye based ink. Good ink for foils, film Metals, and some plastics. |
| 855-C |
3 5 sec. |
Specialty ink used on Cryovac bags which will adhere to all bags coated with corn starch, powder or any anti stick agents. Very good adhesion. |
| 6606 |
10 - 15 sec. |
This ink has the same dye and solvent as the 855 Inks, but the dry time is 10 15 seconds. Made for platen printers because of its body, adhesion and colors systems. The resin system used in this ink are the same as used in Jet Printing ink. Adhesion is excellent. This is the best ink for marking any non porous surface. |
| 8416-A |
15 20 sec. |
This is a pigmented ink designed for withstanding High temperatures ( at least 600 degrees F.) non porous surfaces. |
|
